* Resolve preset type based on nozle diameter if printer_variant is empty
* Fix incorectly resolving plastic type (PLA, ABS, etc.)
* Revert default print-variant handling as it can be not only nozzle diameter
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* CrealityPrint: use printhost_port for WebView URL instead of hardcoded :4408
Fixes#4408 — when printhost_port is configured, use that port in the
Device WebView URL instead of always defaulting to :4408.
* CrealityPrint: remove hardcoded :4408 from Device WebView URL
Drop the CrealityPrint-specific get_print_host_webui override that
unconditionally appended :4408. The generic fallback in PrintHost
already uses print_host_webui/print_host config — users who need
Mainsail on port 4408 should set print_host_webui explicitly.
Fixes#4408
Syncing the filament list from AMS with the "Overwriting" option
displayed the AMS filaments in the wrong (reversed) order in the
preview, even though the filament mapping that was actually applied
was correct. Reported on macOS with a Bambu X1C.
The preview depends on MaterialHash being iterated in material-index
order. MaterialHash is a WX_DECLARE_HASH_MAP, which under OrcaSlicer's
current wxWidgets 3.3 build (wxUSE_STD_CONTAINERS=1) resolves to
std::unordered_map; its iteration order is unspecified and on macOS
(libc++) comes out reversed, which scrambled the preview. The same
code is unaffected in BambuStudio because its older wxWidgets build
still uses wx's own key-ordered hash table, so this only became
visible after the wx upgrade.
Fixes#14335
* feat: native Windows ARM64 build support
Builds on the merged DEPS_ARCH=arm64 plumbing (#13424) by adding the
dependency and source fixes needed for a green native ARM64 build on the
windows-11-arm runner. Validated end-to-end on Snapdragon X Elite hardware
(via a downstream fork using the same fixes); see OrcaSlicer/OrcaSlicer#8271
for the full writeup.
Dependencies:
- OpenEXR 2.5.5: ImfSimd.h hard-codes IMF_HAVE_SSE2 for any MSVC, pulling in
<emmintrin.h> (x86-only) -> C1189. Patch the header to require an x86 target
and force SSE cache vars off on ARM64.
- Boost.Context: use the winfib implementation on ARM64 (Windows Fiber API)
to avoid the armasm64 / CMake ASM_ARMASM linker-module bug, while keeping
the Boost::context target Boost.Asio needs.
- OpenCV: disable WITH_IPP on ARM64 (Intel IPP/IPP-ICV is x86/x64 only;
otherwise ~200 unresolved ippicv* externals at link).
- OpenSSL: use VC-WIN64-ARM on ARM64.
- FindGLEW: add an ARM64 arch branch.
Sources:
- clipper Int128.hpp: _mul128 is an x64-only intrinsic guarded by _WIN64
(true on ARM64); guard on _M_X64 and use the portable path.
- imgui imgui_widgets.cpp: fix va_start(vaList, &text) -> va_start(vaList, text)
(the &-form compiled on x64 but is invalid on ARM64).
- crash reporter: StackWalker.cpp gains an _M_ARM64 branch; BaseException.cpp
uses Cpsr instead of the x86-only EFlags on ARM64.
CI:
- New build_windows_arm64.yml on windows-11-arm: pins CMake 3.31.x, stages
ARM64 GMP/MPFR from MSYS2 clangarm64 (with llvm-dlltool import libs),
caches deps with a fixed-depth hashFiles key, builds and uploads the binary.
OCCT/STEP, SVG-to-3D and text emboss all build and work on ARM64 (no stubs
needed). Full feature parity with x64.
* fix(ci): use forward-slash DESTDIR to avoid CMake '\a' escape error
deps configure failed at GMP/GMP.cmake: "Invalid character escape '\a'"
because DESTDIR carried Windows backslashes (C:\a\...) and is re-parsed
when re-set with the /usr/local suffix. Pass DESTDIR (and the slicer's
DEPS prefix) with forward slashes via %CD:\=/%.
* fix(ci): don't export DESTDIR env var (CMake staged-install doubles paths)
Setting a DESTDIR *environment* variable made CMake treat it as the staged
install prefix and prepend it to every dependency's install path, so e.g.
FreeType installed to <DESTDIR>/a/.../OrcaSlicer_dep/usr/local and OCCT
then couldn't find its headers. Compute the forward-slash path into a
differently-named var (ORCA_DESTDIR) and pass it only via -DDESTDIR.
* ci(windows-arm64): fold ARM64 build into the standard Windows matrix
Replace the standalone build_windows_arm64.yml with a matrix entry on the
existing build_windows job, so x64 and ARM64 share one reusable workflow
chain (build_all -> build_check_cache -> build_deps -> build_orca), per
review feedback on #14059.
- build_all.yml: build_windows now matrices over {x64: windows-latest,
arm64: windows-11-arm} and threads `arch` through. Self-hosted runner
stays x64-only.
- build_check_cache.yml: cache key and dep-prefix path are now
architecture-specific on Windows (deps/build-arm64/OrcaSlicer_dep).
- build_release_vs.bat: accept an `arm64` argument (mirrors
build_release_vs2022.bat) -> uses `-A ARM64` and the build-arm64 tree.
The top-level CMake auto-derives CMAKE_PREFIX_PATH from the build dir,
so no explicit prefix is needed.
- build_deps.yml / build_orca.yml: gate the ARM64-only prep behind
`inputs.arch == 'arm64'` -- pin CMake 3.31.x, and stage MSYS2
clangarm64 GMP/MPFR import libs. NSIS installer/PDB/profile_validator
remain x64-only; ARM64 ships the portable zip. Artifact names get an
arch suffix to avoid collisions between the two Windows jobs.
https://claude.ai/code/session_0164c7ZhCLsYBmCiVN9pWDjK
* ci(temp): generate GMP/MPFR win-arm64 blobs to commit to repo
* feat(deps): add prebuilt GMP/MPFR win-arm64 blobs
The repo ships prebuilt GMP/MPFR import libs + DLLs for win-x64 and
win-x86; the Windows ARM64 build path copies from win-${DEPS_ARCH}
(CMakeLists.txt) but the win-arm64 blobs were missing, so the slicer
configure failed at "file COPY cannot find .../win-arm64/libgmp-10.dll".
Add win-arm64 libgmp-10.{dll,lib} and libmpfr-4.{dll,lib}, generated from
the MSYS2 clangarm64 gmp/mpfr packages with MSVC-compatible import libs via
llvm-dlltool. Headers are shared across arches and unchanged.
* simplify OpenEXR.cmake
* set default arch
* support msix
* ship installer
* try to fix webview2runtime issue
---------
Co-authored-by: Adam Behrman <adam.behrman@gmail.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Adam Behrman <abehrman@users.noreply.github.com>
fix(profiles): add printable_area to fdm_U1 so all nozzle variants inherit correct 270x270 bed
The 0.2/0.6/0.8 nozzle profiles inherit from fdm_U1 which had no
printable_area defined, causing them to fall back to a smaller default
bed size. The 0.4 profile was the only one that set it explicitly.
Move printable_area and printable_height to the shared parent (fdm_U1)
so all Snapmaker U1 nozzle variants get the correct 270x270mm bed.
Bump vendor version to trigger profile re-sync on existing installs.
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
feat: forward plateindex for index-coded .gcode.3mf uploads
Gcode inside a .gcode.3mf is index-coded (Metadata/plate_<N>.gcode) and a
bundle may carry several, so the upload must name which plate to print —
even a single-plate bundle, since its entry is still indexed.
A 1-based plate index is stored in PrintHostUpload::extended_info when use_3mf
is set; the OctoPrint and Moonraker hosts forward it as a `plateindex` form
field. Servers that don't use it ignore the unknown field, so the plain G-code
path is unchanged.
Refactor skirt and brim ownership and emission flow
Refactor skirt and brim generation around a common object/group
ownership model.
Skirts and brims are now emitted as a coordinated preamble
(skirt -> brim -> object) instead of being generated and emitted
through multiple independent code paths.
Changes:
- Fix repeated skirt emission caused by the previous skirt state
tracking logic.
- Restore local skirt/brim ordering for per-object skirts in
By Layer mode.
- Emit brims together with their owning object or object group.
- Handle combined brims independently from skirt grouping.
- Handle draft shields through the same ownership model as skirts.
- Fix draft shield generation when skirt height is zero.
- Generate draft shields after brim geometry is known, preventing
draft shields from overlapping brims.
- Reject unsafe grouped per-object skirt configurations in
By Object mode.
- Remove legacy skirt emission paths and state-management
workarounds.
Support brim generation remains unchanged.
Co-authored-by: SoftFever <softfeverever@gmail.com>
The `@FF AD5M 0.25 nozzle` filament variants carried the base profile's
full printer list (AD5M/AD5M Pro/AD5X 0.4/0.6/0.8) instead of the 0.25
nozzle printers. Combined with base profiles that also listed the AD5X
0.4/0.6/0.8 printers already covered by dedicated `@FF AD5X` variants,
multiple presets with the same alias became compatible with the same
printer. The filament combobox keys presets by full name but displays
them by alias, so these surfaced as duplicate entries (e.g. "Flashforge
PLA Silk", "Flashforge ASA Basic" shown twice).
Fix the `compatible_printers` lists (data only, no settings changed):
- Repoint the 15 `@FF AD5M 0.25 nozzle` variants to the actual 0.25
nozzle printers (Adventurer 5M 0.25 + Adventurer 5M Pro 0.25).
- Remove the redundant AD5X 0.4/0.6/0.8 entries from the base profiles
where dedicated AD5X variants already exist.
- Bump Flashforge profile version to 02.04.00.02.
Each affected filament now resolves to exactly one preset per printer,
and the previously uncovered AD5M 0.25 nozzle printers gain coverage.
* Snapmaker U1: add 0.2mm and 0.8mm nozzle profiles
Add machine and process profiles for the Snapmaker U1's 0.2mm and
0.8mm nozzles, and complete the 0.6mm process lineup. Follows the
same data-only pattern used to add the 0.6 / 0.4+0.6 nozzles in
commit afc3756.
The U1 ships with 0.4, 0.4+0.6 and 0.6 nozzle options today; the 0.2
and 0.8 nozzles are supported hardware but have no profiles, so they
cannot be selected. This adds them the Orca-native way: per-nozzle
machine presets plus a model-file dropdown entry, with their process
profiles filtered in via compatible_printers.
Machine (2): lean presets inheriting fdm_U1, mirroring the existing
SM_U1_06 (0.6) preset and overriding only the per-nozzle values;
setting_ids SM_U1_02 / SM_U1_08.
Process (21): 2 per-nozzle commons (fdm_process_U1_0.2_common,
_0.8_common) holding the nozzle line widths, plus 19 profiles
(0.2: 8, 0.6: 6, 0.8: 5) that inherit their per-nozzle common and
carry their own layer height, matching upstream's factoring. The two
0.24 Standard profiles that shared id GP029 are split into
GP029_06_024 / GP029_08_024.
Model dropdown: machine/Snapmaker U1.json nozzle_diameter
"0.4;0.4+0.6;0.6" -> "0.2;0.4;0.4+0.6;0.6;0.8".
Vendor index: register the new presets in Snapmaker.json.
The existing 0.4 / 0.6 / 0.4+0.6 presets resolve identically before
and after. scripts/orca_extra_profile_check.py and the profile
validator both pass.
* chore(profiles): bump Snapmaker vendor version to 02.04.00.04
Bump the Snapmaker vendor config_version so existing installs pick up the new 0.2mm and 0.8mm U1 nozzle profiles. PresetUpdater only re-imports a vendor bundle when the shipped version is strictly greater than the cached one.
---------
Co-authored-by: ni4223 <ni4223@users.noreply.github.com>
K1C: corrige erro 'End of file' ao enviar impressao (start_print)
A K1-family fecha o WebSocket 9999 assim que aceita o comando de iniciar
impressao. O start_print fazia um ws.read() bloqueante logo apos o write, que
estourava 'End of file [asio.misc:2]' e era reportado como erro -- embora a
impressao ja tivesse iniciado (o comando e entregue no write). Torna o read e o
close best-effort (overloads com error_code), eliminando o falso erro. Mesmo
padrao ja usado em feed_filament; cobre os caminhos single-color e multicor.
Several Artillery and Flashforge machine profiles set the first-layer nozzle temperature with M104 (set, no wait) immediately before the purge/prime line. The purge then runs before the nozzle reaches temperature, so filament is extruded through a nozzle that is not yet hot enough to melt it. Changed M104 to M109 so the printer waits for the target temperature before purging.
Affected profiles:
- Artillery Sidewinder X3 Plus / X3 Pro / X4 Plus / X4 Pro (0.4 nozzle)
- Flashforge AD5X (0.25/0.4/0.6/0.8)
- Flashforge Adventurer 5M / 5M Pro (0.25/0.8 overrides + shared fdm_adventurer5m_common, which also covers the 0.4/0.6 variants via inheritance)
Refs #4337
Build the Linux AppImage for ARM64 (aarch64) alongside x86_64: the Linux CI
job now matrixes over both architectures, with arch-aware deps caching and
artifact/asset names (amd64 keeps its existing names). The aarch64 AppImage is
published to the nightly and release pages like the x86_64 one.
Run the unit-test suite on the aarch64 runner (faster GitHub arm runner); the
tests are built on that leg. Self-hosted keeps tests on the amd64 server.
* Degrees symbol don't need localization
* The Z when referring to the axis should be uppercase
* Fix the spelling of "GitHub" to camelcase
* Unify the casing of mouse button shortcuts
* Always use G-code with an hyphen
* Fix the spelling of "restricted"
* More grammar fixes
* add missing modifications
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Store user session information along with refresh token, to allow offline use once user is logged in
* Don't bother with avatar because we won't see it when offline anyway
* Fix offline Sync Presets freezing the UI on repeat clicks
Ignore restart_sync_user_preset() while a manual sync's progress dialog is on screen, so a second app-modal dialog can't stack on the first. Offline the dialog blocks on a long, uncancellable HTTP timeout; on macOS the global menu stays live while the window is disabled, so a second click otherwise wedges the app (force-quit only).
* Skip redundant user-secret re-write on startup
set_user_session() always re-encrypts and writes the secret to disk; on the startup restore path that just rewrites the bytes it was loaded from. Add a persist flag so the restore path skips it. Also drop an unused catch binding and a stray blank line.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
perf(GCodeProcessor): stop recompiling std::regex on every g-code line
process_SET_VELOCITY_LIMIT() constructed three std::regex objects from
scratch on every call, and Klipper-flavor g-code contains
SET_VELOCITY_LIMIT on a large share of lines (8,834 of 103,549 lines for
a single 3DBenchy sliced for a Creality K2). perf attributes 6.4% of the
whole slicing run to this one function, almost all of it regex
compilation and the allocator traffic it generates.
process_SET_PRESSURE_ADVANCE() and the External_Purge_Tag handler had
the same per-call construction.
Hoist all five patterns to function-local static const std::regex so
they compile once. Generated g-code is byte-identical (modulo the
timestamp header); slicing a 16x Benchy plate for a K2 drops from
78.5s to 27.3s wall (2.9x) on a 16-core Linux box, single Benchy from
8.9s to 5.6s.
Co-authored-by: grant0013 <grant@harktech.co.uk>
The testing guide stated OrcaSlicer uses Catch2 v2 and advised the v2
`<catch2/catch.hpp>` include, but the vendored framework is v3.11.0
(tests/catch2/) and every test file includes `<catch2/catch_all.hpp>`.
The wrong version drove several incorrect claims: that SKIP() is
unavailable (it is, v3.3.0+), that the string matcher is "Contains"
rather than "ContainsSubstring", and that thread-safe assertions,
multiple reporters, STATIC_CHECK and built-in sharding do not exist.
Correct all version statements, the example include, and the
former "Version-Specific Limitations" section to reflect v3.11.0.
