fix(build): sub_brands in AmsTrayData; wxFileName::Normalize() wxPATH_NORM_ALL (wx 3.3)

filament_id_by_name() verwarf abgeleitete User-Presets, weil
filament_vendor vom Vendor-Parent (z.B. Anycubic) statt vom User-Preset
(Tinmorry) aufgelöst wird. Der Vendor-Filter wird jetzt nur noch auf
System-Presets angewandt; bei User-Presets ist der strikte Namensvergleich
ausreichend, sodass der AMS-Sync das korrekte Preset trifft.

.github/workflows/build_all.yml

@@ -14,6 +14,8 @@ on:
      - 'resources/**'
      - ".github/workflows/build_*.yml"
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
+     - 'tests/**'
 
   pull_request:
     branches:
@@ -30,6 +32,8 @@ on:
      - 'build_release_vs2022.bat'
      - 'build_release_macos.sh'
      - 'scripts/flatpak/**'
+     - 'scripts/msix/**'
+     - 'tests/**'
 
 
   schedule:
@@ -51,11 +55,23 @@ jobs:
   build_linux:
     strategy:
       fail-fast: false
+      # Build both arches on every event (PRs included), through the same
+      # build_check_cache -> build_deps -> build_orca chain (the AppImage).
+      # aarch64 always uses the GitHub-hosted arm runner (there is no arm
+      # self-hosted server). amd64's empty arch is load-bearing: it keeps the
+      # historical 'linux-clang' deps cache key and the unsuffixed asset names.
+      matrix:
+        include:
+          - arch: ""
+            os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+          - arch: "aarch64"
+            os: ubuntu-24.04-arm
     # Don't run scheduled builds on forks:
     if: ${{ !cancelled() && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
     uses: ./.github/workflows/build_check_cache.yml
     with:
-      os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+      os: ${{ matrix.os }}
+      arch: ${{ matrix.arch }}
       build-deps-only: ${{ inputs.build-deps-only || false }}
     secrets: inherit
   build_windows:
@@ -95,7 +111,9 @@ jobs:
     secrets: inherit
   unit_tests:
     name: Unit Tests
-    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
+    # Tests are built on the aarch64 leg by default (faster GitHub arm runner),
+    # so run them there; self-hosted builds them on the amd64 server instead.
+    runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04-arm' }}
     needs: build_linux
     if: ${{ !cancelled() && success() }}
     steps:
@@ -233,4 +251,3 @@ jobs:
         asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
         asset_content_type: application/octet-stream
         max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-

.github/workflows/build_check_cache.yml

@@ -33,8 +33,10 @@ jobs:
       - name: set outputs
         id: set_outputs
         env:
-          # Keep macOS cache keys and paths architecture-specific.
-          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || 'linux-clang') }}
+          # Keep macOS/Linux cache keys architecture-specific. amd64 Linux passes
+          # no arch (key stays 'linux-clang', preserving the existing cache);
+          # aarch64 gets its own 'linux-clang-aarch64' key.
+          cache-os: ${{ runner.os == 'macOS' && format('macos-{0}', inputs.arch) || (runner.os == 'Windows' && 'windows' || format('linux-clang{0}', inputs.arch && format('-{0}', inputs.arch) || '')) }}
           dep-folder-name: ${{ runner.os == 'macOS' && format('/{0}', inputs.arch) || '/OrcaSlicer_dep' }}
           output-cmd: ${{ runner.os == 'Windows' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
         run: |

.github/workflows/build_orca.yml

@@ -65,6 +65,11 @@ jobs:
           echo "ver_pure=$ver_pure" >> $GITHUB_ENV
           echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
           echo "git_commit_hash=$git_commit_hash" >> $GITHUB_ENV
+          # Per-arch Linux AppImage naming: amd64 keeps the historical unsuffixed
+          # name (arch_suffix empty). Unused on macOS/Windows.
+          if [ '${{ inputs.arch }}' = 'aarch64' ]; then
+            echo "arch_suffix=_aarch64" >> $GITHUB_ENV
+          fi
         shell: bash
 
       - name: Get the version and date on Windows
@@ -153,14 +158,6 @@ jobs:
         run: |
           ./build_release_macos.sh -u -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a universal -t 10.15
 
-      - name: Delete intermediate per-arch artifacts
-        if: runner.os == 'macOS' && inputs.macos-combine-only
-        uses: geekyeggo/delete-artifact@v6
-        with:
-          name: |
-            OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}
-            OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}
-
  # Thanks to RaySajuuk, it's working now
       - name: Sign app and notary
         if: github.repository == 'OrcaSlicer/OrcaSlicer' && (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && runner.os == 'macOS' && inputs.macos-combine-only
@@ -171,6 +168,8 @@ jobs:
           KEYCHAIN_PASSWORD: ${{ secrets.KEYCHAIN_PASSWORD }}
           CERTIFICATE_ID: ${{ secrets.MACOS_CERTIFICATE_ID }}
         run: |
+          # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
+          source ${{ github.workspace }}/scripts/retry.sh
           CERTIFICATE_PATH=$RUNNER_TEMP/build_certificate.p12
           KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
           echo -n "$BUILD_CERTIFICATE_BASE64" | base64 --decode --output $CERTIFICATE_PATH
@@ -193,7 +192,7 @@ jobs:
           rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
           cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
           ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
+          retry hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           
           # Create separate OrcaSlicer_profile_validator DMG if the app exists
@@ -202,7 +201,7 @@ jobs:
             rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
             cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
             ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
+            retry hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
             codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
           fi
           
@@ -220,11 +219,13 @@ jobs:
         if: github.ref != 'refs/heads/main' && runner.os == 'macOS' && inputs.macos-combine-only
         working-directory: ${{ github.workspace }}
         run: |
+          # Load the `retry` helper (retries flaky commands such as `hdiutil create`).
+          source ${{ github.workspace }}/scripts/retry.sh
           mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_dmg
           rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/*
           cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/
           ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_dmg/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
+          retry hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_dmg -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
           
           # Create separate OrcaSlicer_profile_validator DMG if the app exists
           if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
@@ -232,9 +233,19 @@ jobs:
             rm -rf ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/*
             cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
             ln -sfn /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
+            retry hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
           fi
 
+      # Delete the per-arch bundles only after signing/DMG creation succeeded, so a
+      # failed run keeps them available for a re-run instead of forcing a full rebuild.
+      - name: Delete intermediate per-arch artifacts
+        if: success() && runner.os == 'macOS' && inputs.macos-combine-only
+        uses: geekyeggo/delete-artifact@v6
+        with:
+          name: |
+            OrcaSlicer_Mac_bundle_arm64_${{ github.sha }}
+            OrcaSlicer_Mac_bundle_x86_64_${{ github.sha }}
+
       - name: Upload artifacts mac
         if: runner.os == 'macOS' && inputs.macos-combine-only
         uses: actions/upload-artifact@v7
@@ -371,6 +382,25 @@ jobs:
           asset_content_type: application/x-msdownload
           max_releases: 1
 
+      - name: Build MSIX Store package Win
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        working-directory: ${{ github.workspace }}
+        shell: pwsh
+        run: |
+          ./scripts/msix/build_msix.ps1 `
+            -InstallDir "${{ github.workspace }}/build/OrcaSlicer" `
+            -OutputPath "${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix" `
+            -IdentityName "${{ vars.ORCA_MSIX_IDENTITY_NAME || 'OrcaSlicer.OrcaSlicer' }}" `
+            -Publisher "${{ vars.ORCA_MSIX_PUBLISHER || 'CN=38F7EA55-C73B-4072-B3B2-C8E0EA15BB82' }}" `
+            -PublisherDisplayName "${{ vars.ORCA_MSIX_PUBLISHER_DISPLAY_NAME || 'OrcaSlicer' }}"
+
+      - name: Upload artifacts Win MSIX
+        if: runner.os == 'Windows' && !vars.SELF_HOSTED
+        uses: actions/upload-artifact@v7
+        with:
+          name: OrcaSlicer_Windows_MSIX_${{ env.ver }}
+          path: ${{ github.workspace }}/build/OrcaSlicer_Windows_MSIX_${{ env.ver }}.msix
+
 # Ubuntu
       - name: Apt-Install Dependencies
         if: runner.os == 'Linux' && !vars.SELF_HOSTED
@@ -382,16 +412,23 @@ jobs:
         if: runner.os == 'Linux'
         shell: bash
         run: |
-          ./build_linux.sh -istrlL
+          # Build + tar the unit tests (-t) only on the leg that runs them: the
+          # aarch64 leg by default (faster GitHub arm runner), or amd64 when using
+          # self-hosted runners (no arm self-hosted server). unit_tests downloads
+          # this tarball. The profile validator is built with -s, so amd64 keeps it.
+          tests=${{ (!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64') }}
+          if $tests; then flags=-istrlL; else flags=-isrlL; fi
+          ./build_linux.sh "$flags"
           ./scripts/check_appimage_libs.sh ./build/package ./build/package/bin/orca-slicer
-          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          chmod +x ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          tar -cvpf build_tests.tar build/tests
+          appimage=./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
+          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage "$appimage"
+          chmod +x "$appimage"
+          if $tests; then tar -cvpf build_tests.tar build/tests; fi
 
         # Use tar because upload-artifacts won't always preserve directory structure
         # and doesn't preserve file permissions
       - name: Upload Test Artifact
-        if: runner.os == 'Linux'
+        if: runner.os == 'Linux' && ((!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64'))
         uses: actions/upload-artifact@v7
         with:
           name: ${{ github.sha }}-tests
@@ -401,7 +438,7 @@ jobs:
           if-no-files-found: error
 
       - name: Run external slicer regression tests
-        if: runner.os == 'Linux'
+        if: runner.os == 'Linux' && inputs.arch != 'aarch64'
         timeout-minutes: 20
         shell: bash
         run: |
@@ -411,7 +448,7 @@ jobs:
           python3 "$test_repo_dir/run_test.py" "${{ github.workspace }}/build/package/bin/orca-slicer"
 
       - name: Build orca_custom_preset_tests
-        if: github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED
+        if: github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64'
         working-directory: ${{ github.workspace }}/build/src/Release
         shell: bash
         run: |
@@ -423,11 +460,11 @@ jobs:
         if: ${{ ! env.ACT && runner.os == 'Linux' }}
         uses: actions/upload-artifact@v7
         with:
-          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
+          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}${{ env.arch_suffix }}_${{ env.ver }}
+          path: "./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage"
 
       - name: Upload OrcaSlicer_profile_validator Ubuntu
-        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ ! env.ACT && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: actions/upload-artifact@v7
         with:
           name: OrcaSlicer_profile_validator_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
@@ -439,12 +476,12 @@ jobs:
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
           release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_nightly.AppImage
+          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
+          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_nightly.AppImage
           asset_content_type: application/octet-stream
           max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
       - name: Deploy Ubuntu release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: rickstaa/action-create-tag@v1
         with:
           tag: "nightly-builds"
@@ -453,7 +490,7 @@ jobs:
           message: "nightly-builds"
 
       - name: Deploy Ubuntu OrcaSlicer_profile_validator release
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}
@@ -464,7 +501,7 @@ jobs:
           max_releases: 1
 
       - name: Deploy orca_custom_preset_tests
-        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED }}
+        if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' && ! env.ACT && github.ref == 'refs/heads/main' && runner.os == 'Linux' && !vars.SELF_HOSTED && inputs.arch != 'aarch64' }}
         uses: WebFreak001/deploy-nightly@v3.2.0
         with:
           upload_url: https://uploads.github.com/repos/OrcaSlicer/OrcaSlicer/releases/137995723/assets{?name,label}

.github/workflows/publish_release.yml

@@ -73,8 +73,9 @@ jobs:
 
       - name: Download release artifacts from build run
         run: |
+          # Windows_V* (not Windows_*) keeps the MSIX Store artifact out: it goes to Partner Center, not GitHub releases.
           gh run download "$RUN_ID" --repo "$GITHUB_REPOSITORY" --dir artifacts \
-            -p 'OrcaSlicer_Windows_*' \
+            -p 'OrcaSlicer_Windows_V*' \
             -p 'OrcaSlicer_Mac_universal_*' \
             -p 'OrcaSlicer_Linux_ubuntu_*' \
             -p 'OrcaSlicer-Linux-flatpak_*' \

CMakeLists.txt

@@ -464,6 +464,13 @@ if (NOT MSVC AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMP
         set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=template-id-cdtor" )
     endif()
 
+    # GCC 13+ produces false-positive -Wmaybe-uninitialized under heavy inlining
+    # (e.g. ConflictChecker.hpp / Print.cpp). The upstream build does not set
+    # -Werror globally, but GCC 13 can internally signal exit-code 1 for these.
+    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER_EQUAL 13)
+        add_compile_options(-Wno-maybe-uninitialized)
+    endif()
+
 endif()
 
 if (SLIC3R_ASAN)

README.md

@@ -1,51 +1,58 @@
 # OrcaSlicer-KX
 
-**OrcaSlicer builds with extra Anycubic Kobra X patches**
+**OrcaSlicer mit KX-Bridge-Patches für den Anycubic Kobra X**
 
-Pre-built [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) binaries that bundle in-progress PRs improving Kobra X support — recommended for use with [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+Fertige Binaries von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer) mit integrierten KX-spezifischen Erweiterungen — empfohlen für den Einsatz mit [KX-Bridge](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
 
 [![Download](https://img.shields.io/badge/Download-Releases-2EA043?style=for-the-badge&logo=gitea&logoColor=white)](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases)
 
 ---
 
-## Custom Filament Presets & KX-Bridge
-
-📄 [How to create, verify and import custom filament presets](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
-
----
-
-## Included patches
-
-- **[PR #13372](https://github.com/SoftFever/OrcaSlicer/pull/13372)** — Moonraker / Happy-Hare AMS sync fix
-- **[PR #13529](https://github.com/SoftFever/OrcaSlicer/pull/13529)** — Anycubic Kobra X printer profiles
-- **[PR #13677](https://github.com/SoftFever/OrcaSlicer/pull/13677)** — Kobra X G-code fix
-- **[PR #13719](https://github.com/SoftFever/OrcaSlicer/pull/13719)** — Vendor + name matching for Moonraker filament sync
-- KX-specific filament-hint patches (unique `filament_id` for user presets, 3-pass matching, sub-brands)
-
----
-
 ## Download
 
-Get the latest binaries from the [Releases page](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/releases):
+Aktuelle Version: **2.4.0-kx1** (Basis: OrcaSlicer 2.4.0 stable)
 
-- **Linux:** `OrcaSlicer_Linux_V*.AppImage` — `chmod +x` and run
-- **Windows:** `OrcaSlicer-Windows-x64.zip` — extract and run `orca-slicer.exe`
+| Plattform | Datei | Hinweis |
+|-----------|-------|---------|
+| Linux x86_64 | `OrcaSlicer-KX-Linux-x86_64.AppImage` | `chmod +x` setzen, dann starten |
+| Windows x86_64 | `OrcaSlicer-KX-Windows-x86_64.zip` | Entpacken, `orca-slicer.exe` starten |
 
-Checksums in `SHA256SUMS.txt`. macOS is not provided here — build from upstream.
-
-> ⚠ This is an **alpha build** (OrcaSlicer 2.4.0-alpha). Use at your own risk.
+macOS wird nicht bereitgestellt — bitte aus dem Upstream selbst bauen.
 
 ---
 
-## Why a separate repo?
+## Enthaltene Patches
 
-KX-Bridge itself is hosted at [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
-OrcaSlicer is a different project under a different license (AGPL-3.0) — kept separate so licenses, source provenance and update cycles do not get tangled.
+- **Moonraker-Bridge:** mehrstufiges Filament-Matching (Name, Sub-Brand, Vendor-Fallback) mit Vendor-Filter-Skip
+- **AMS-Leerslot-Fix:** leere AMS-Slots werden korrekt grau dargestellt (kein Absturz / falsches Filament)
+- **Filament-ID:** eindeutige `filament_id` für abgeleitete User-Presets (korrekte Bridge-Synchronisation)
+- **Kobra X Profile:** Drucker- und G-Code-Profile für den Anycubic Kobra X
 
 ---
 
-## License & source
+## Filament-Presets & KX-Bridge
 
-These builds are derivatives of [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), licensed under **GNU AGPL-3.0**.
-The KX-specific patches live on branch [`build-alpha-pr-kx-filament-hint`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/build-alpha-pr-kx-filament-hint) of this repository.
+📄 [Anleitung: eigene Filament-Presets erstellen, prüfen und importieren](https://gitea.it-drui.de/viewit/KX-Bridge-Release/src/branch/master/docs/filament-preset-bridge-guide.md)
 
+---
+
+## Branch-Struktur
+
+| Branch | Version | Rolle |
+|--------|---------|-------|
+| `stable` / `kx-v2.4` | 2.4.0-kx1 | **aktuell stabil** |
+| `kx-v2.3` | 2.3.2-kx4 | eingefroren (Altstand) |
+
+---
+
+## Warum ein eigenes Repo?
+
+KX-Bridge selbst liegt unter [viewit/KX-Bridge-Release](https://gitea.it-drui.de/viewit/KX-Bridge-Release).
+OrcaSlicer steht unter AGPL-3.0 — ein separates Repo hält Lizenzen, Quellherkunft und Update-Zyklen sauber getrennt.
+
+---
+
+## Lizenz & Quelle
+
+Diese Builds sind Ableitungen von [OrcaSlicer](https://github.com/SoftFever/OrcaSlicer), lizenziert unter **GNU AGPL-3.0**.
+Der KX-Patch-Quellcode liegt auf Branch [`kx-v2.4`](https://gitea.it-drui.de/viewit/OrcaSlicer-KX/src/branch/kx-v2.4) dieses Repos.

build_linux.sh

@@ -504,13 +504,24 @@ if [[ -n "${USE_LLD}" ]] ; then
     fi
 fi
 
-# Auto-detect ccache for faster rebuilds
 export CMAKE_CCACHE_ARGS=()
-if command -v ccache >/dev/null 2>&1 ; then
-    echo "ccache found at $(command -v ccache), enabling compiler caching..."
-    export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER=ccache -DCMAKE_CXX_COMPILER_LAUNCHER=ccache)
+CMAKE_CCACHE=${CMAKE_CCACHE:-}
+if [ -n "$CMAKE_CCACHE" ]; then
+        echo "Checking ${CMAKE_CCACHE} environment variable for compiler cache program..."
+        CMAKE_CCACHE=$(command -v "${CMAKE_CCACHE}") || {
+            echo "CMAKE_CCACHE environment variable is set to '${CMAKE_CCACHE}' but it was not found in PATH."
+            CMAKE_CCACHE=""
+        }
+elif command -v sccache >/dev/null 2>&1 ; then
+        CMAKE_CCACHE=$(command -v sccache)
+elif command -v ccache >/dev/null 2>&1 ; then
+        CMAKE_CCACHE=$(command -v ccache)
+fi
+if [ -n "${CMAKE_CCACHE}" ] ; then
+    echo "${CMAKE_CCACHE} found, enabling compiler caching..."
+    export CMAKE_CCACHE_ARGS=(-DCMAKE_C_COMPILER_LAUNCHER="${CMAKE_CCACHE}" -DCMAKE_CXX_COMPILER_LAUNCHER="${CMAKE_CCACHE}")
 else
-    echo "Note: ccache not found. Install ccache for faster rebuilds."
+    echo "Note: ccache or sccache are not found. Install either of them for faster rebuilds."
 fi
 
 if [[ -n "${BUILD_DEPS}" ]] ; then
@@ -525,7 +536,7 @@ if [[ -n "${BUILD_DEPS}" ]] ; then
         BUILD_ARGS+=(-DCMAKE_BUILD_TYPE="${BUILD_CONFIG}")
     fi
 
-    print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
+    print_and_run cmake -S deps -B deps/$BUILD_DIR "${CMAKE_C_CXX_COMPILER_CLANG[@]}" "${CMAKE_LLD_LINKER_ARGS[@]}" "${CMAKE_CCACHE_ARGS[@]}" -G Ninja "${COLORED_OUTPUT}" "${BUILD_ARGS[@]}"
     print_and_run cmake --build deps/$BUILD_DIR -j1
 fi
 

deps/Boost/Boost.cmake

@@ -10,7 +10,13 @@ if (APPLE AND CMAKE_OSX_ARCHITECTURES)
     set(_context_arch_line "-DBOOST_CONTEXT_ARCHITECTURE:STRING=${CMAKE_OSX_ARCHITECTURES}")
 endif ()
 
+set(_options "")
+if (MSVC AND DEP_DEBUG)
+    set(_options "FORWARD_CONFIG")
+endif ()
+
 orcaslicer_add_cmake_project(Boost
+    ${_options}
     URL "https://github.com/boostorg/boost/releases/download/boost-1.84.0/boost-1.84.0.tar.gz"
     URL_HASH SHA256=4d27e9efed0f6f152dc28db6430b9d3dfb40c0345da7342eaa5a987dde57bd95
     LIST_SEPARATOR |

deps/CMakeLists.txt

@@ -155,17 +155,25 @@ if (NOT _is_multi AND NOT CMAKE_BUILD_TYPE)
 endif ()
 
 function(orcaslicer_add_cmake_project projectname)
-    cmake_parse_arguments(P_ARGS "" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
+    cmake_parse_arguments(P_ARGS "FORWARD_CONFIG" "INSTALL_DIR;BUILD_COMMAND;INSTALL_COMMAND" "CMAKE_ARGS" ${ARGN})
 
     set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
     if (_is_multi OR MSVC)
-        if (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
+        if (P_ARGS_FORWARD_CONFIG)
+            set(_configs_line -DCMAKE_BUILD_TYPE:STRING=${CMAKE_BUILD_TYPE})
+        elseif (ORCA_INCLUDE_DEBUG_INFO AND NOT DEP_DEBUG)
             set(_configs_line "-DCMAKE_C_FLAGS_RELEASE:STRING=${CMAKE_C_FLAGS_RELWITHDEBINFO} -DCMAKE_CXX_FLAGS_RELEASE:STRING=${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
         else ()
             set(_configs_line "")
         endif ()
     endif ()
 
+    if (P_ARGS_FORWARD_CONFIG)
+        set(_target_config "$<CONFIG>")
+    else()
+        set(_target_config "Release")
+    endif()
+
     if (MSVC)
       set(_gen CMAKE_GENERATOR "${DEP_MSVC_GEN}" CMAKE_GENERATOR_PLATFORM "${DEP_PLATFORM}")
     else()
@@ -196,6 +204,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             -DCMAKE_DEBUG_POSTFIX:STRING=d
             -DCMAKE_C_COMPILER:STRING=${CMAKE_C_COMPILER}
             -DCMAKE_CXX_COMPILER:STRING=${CMAKE_CXX_COMPILER}
+            -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER}
+            -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER}
             -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE}
             -DCMAKE_EXE_LINKER_FLAGS:STRING=${CMAKE_EXE_LINKER_FLAGS}
             -DCMAKE_SHARED_LINKER_FLAGS:STRING=${CMAKE_SHARED_LINKER_FLAGS}
@@ -206,8 +216,8 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE)
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
     if (FLATPAK)
@@ -241,14 +251,16 @@ else()
             -DCMAKE_INSTALL_PREFIX:STRING=${DESTDIR}
             -DCMAKE_PREFIX_PATH:STRING=${DESTDIR}
             -DCMAKE_IGNORE_PREFIX_PATH:STRING=${CMAKE_IGNORE_PREFIX_PATH}
+            -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER}
+            -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER}
             -DBUILD_SHARED_LIBS:BOOL=OFF
             ${_cmake_osx_arch}
             "${_configs_line}"
             ${DEP_CMAKE_OPTS}
             ${P_ARGS_CMAKE_ARGS}
        ${P_ARGS_UNPARSED_ARGUMENTS}
-       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config Release -- ${_build_j}
-       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config Release
+       BUILD_COMMAND ${CMAKE_COMMAND} --build . --config ${_target_config} -- ${_build_j}
+       INSTALL_COMMAND ${CMAKE_COMMAND} --build . --target install --config ${_target_config}
     )
 
 endif()

deps/Draco/Draco.cmake

@@ -1,4 +1,10 @@
+set(_options "")
+if (MSVC AND DEP_DEBUG)
+    set(_options "FORWARD_CONFIG")
+endif ()
+
 orcaslicer_add_cmake_project(Draco
+    ${_options}
     URL https://github.com/google/draco/archive/refs/tags/1.5.7.zip
     URL_HASH SHA256=27b72ba2d5ff3d0a9814ad40d4cb88f8dc89a35491c0866d952473f8f9416b77
 )

deps/OpenCV/OpenCV.cmake

@@ -1,7 +1,11 @@
 if (MSVC)
     set(_use_IPP "-DWITH_IPP=ON")
+    if (DEP_DEBUG)
+        set(_options "FORWARD_CONFIG")
+    endif ()
 else ()
     set(_use_IPP "-DWITH_IPP=OFF")
+    set(_options "")
 endif ()
 
 if (IN_GIT_REPO)
@@ -9,6 +13,7 @@ if (IN_GIT_REPO)
 endif ()
 
 orcaslicer_add_cmake_project(OpenCV
+    ${_options}
     URL https://github.com/opencv/opencv/archive/refs/tags/4.6.0.tar.gz
     URL_HASH SHA256=1ec1cba65f9f20fe5a41fda1586e01c70ea0c9a6d7b67c9e13edf0cfe2239277
     PATCH_COMMAND git apply ${OpenCV_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-vs.patch  ${CMAKE_CURRENT_LIST_DIR}/0002-clang19-macos.patch

deps_src/libnest2d/include/libnest2d/placers/nfpplacer.hpp

@@ -1123,18 +1123,17 @@ private:
 
         std::vector<RawShape> objs,excludes;
         for (const Item &item : items_) {
-            if (item.isFixed()) continue;
-            objs.push_back(item.transformedShape());
+            if (item.isFixed())
+                excludes.push_back(item.transformedShape());
+            else
+                objs.push_back(item.transformedShape());
         }
         if (objs.empty())
             return;
+        // Without fixed items this inner-fit NFP can exceed clipper's range and crash MSVC.
+        if (!excludes.empty())
         { // find a best position inside NFP of fixed items (excluded regions), so the center of pile is cloest to bed center
             RawShape objs_convex_hull = sl::convexHull(objs);
-            for (const Item &item : items_) {
-                if (item.isFixed()) {
-        		    excludes.push_back(item.transformedShape());
-                }
-            }
 
             auto   nfps = calcnfp(objs_convex_hull, excludes, bbin, Lvl<MaxNfpLevel::value>());
             if (nfps.empty()) {

localization/i18n/list.txt

@@ -48,9 +48,12 @@ src/slic3r/GUI/DeviceTab/uiAmsHumidityPopup.cpp
 src/slic3r/GUI/DeviceTab/uiDeviceUpdateVersion.h
 src/slic3r/GUI/DeviceTab/uiDeviceUpdateVersion.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.hpp
 src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.hpp
 src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFuzzySkin.hpp
 src/slic3r/GUI/Gizmos/GLGizmoMove.cpp
 src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp
 src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
@@ -58,6 +61,7 @@ src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
 src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
 src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
 src/slic3r/GUI/Gizmos/GLGizmoCut.cpp
+src/slic3r/GUI/Gizmos/GLGizmoCut.hpp
 src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFaceDetector.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp
@@ -67,7 +71,9 @@ src/slic3r/GUI/Gizmos/GLGizmoText.hpp
 src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp
 src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMeasure.hpp
 src/slic3r/GUI/Gizmos/GLGizmoAssembly.cpp
+src/slic3r/GUI/Gizmos/GLGizmoAssembly.hpp
 src/slic3r/GUI/GUI.cpp
 src/slic3r/GUI/GUI_App.cpp
 src/slic3r/GUI/GUI_AuxiliaryList.cpp
@@ -89,6 +95,8 @@ src/slic3r/GUI/Widgets/AMSControl.cpp
 src/slic3r/GUI/Widgets/FanControl.cpp
 src/slic3r/GUI/Widgets/FilamentLoad.cpp
 src/slic3r/GUI/Widgets/TempInput.cpp
+src/slic3r/GUI/Widgets/CheckList.cpp
+src/slic3r/GUI/Widgets/SwitchButton.cpp
 src/slic3r/GUI/ImGuiWrapper.cpp
 src/slic3r/GUI/Jobs/ArrangeJob.cpp
 src/slic3r/GUI/Jobs/OrientJob.cpp
@@ -98,6 +106,7 @@ src/slic3r/GUI/Jobs/BindJob.cpp
 src/slic3r/GUI/Jobs/PrintJob.cpp
 src/slic3r/GUI/Jobs/SendJob.cpp
 src/slic3r/GUI/Jobs/EmbossJob.cpp
+src/slic3r/GUI/Jobs/PlaterWorker.hpp
 src/slic3r/GUI/ThermalPreconditioningDialog.cpp
 src/slic3r/GUI/ThermalPreconditioningDialog.hpp
 src/slic3r/GUI/Jobs/SLAImportJob.cpp
@@ -237,8 +246,12 @@ src/slic3r/GUI/FilamentMapPanel.cpp
 src/slic3r/Utils/Obico.cpp
 src/slic3r/Utils/SimplyPrint.cpp
 src/slic3r/Utils/Flashforge.cpp
+src/slic3r/Utils/ElegooLink.cpp
+src/slic3r/Utils/CrealityPrint.cpp
+src/slic3r/Utils/PrintHost.cpp
 src/slic3r/GUI/Jobs/OAuthJob.cpp
 src/slic3r/GUI/Gizmos/GLGizmoBrimEars.cpp
+src/slic3r/GUI/Gizmos/GLGizmoBrimEars.hpp
 src/slic3r/GUI/PartSkipDialog.cpp
 src/slic3r/GUI/PartSkipDialog.hpp
 src/slic3r/GUI/SkipPartCanvas.cpp
@@ -250,4 +263,12 @@ src/slic3r/GUI/NetworkPluginDialog.cpp
 src/slic3r/GUI/RammingChart.cpp
 src/slic3r/GUI/StepMeshDialog.cpp
 src/slic3r/GUI/FilamentPickerDialog.hpp
+src/slic3r/GUI/PresetBundleDialog.cpp
+src/slic3r/GUI/ExportPresetBundleDialog.cpp
+src/slic3r/GUI/DesktopIntegrationDialog.cpp
+src/slic3r/GUI/Downloader.cpp
+src/slic3r/GUI/DownloaderFileGet.cpp
+src/slic3r/GUI/FileArchiveDialog.cpp
+src/slic3r/GUI/PrinterCloudAuthDialog.cpp
+src/slic3r/GUI/PrinterWebViewHandler.cpp
 src/libslic3r/PresetBundle.cpp

resources/data/hints.ini

@@ -146,16 +146,16 @@ text = Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned
 text = Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts.
 
 [hint:Speed up your print with Adaptive Layer Height]
-text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!
+text = Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster by using the Adaptive Layer Height option? Check it out!
 
 [hint:Support painting]
 text = Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it.
 
 [hint:Different types of supports]
-text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!
+text = Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models while saving filament and improving print speed. Check them out!
 
 [hint:Printing Silk Filament]
-text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results.
+text = Printing Silk Filament\nDid you know that Silk filament needs special consideration to print successfully? A higher temperature and lower speed are always recommended for the best results.
 
 [hint:Brim for better adhesion]
 text = Brim for better adhesion\nDid you know that when printed models have a small contact interface with the printing surface, it's recommended to use a brim?
@@ -167,13 +167,13 @@ text = Set parameters for multiple objects\nDid you know that you can set slicin
 text = Stack objects\nDid you know that you can stack objects as a whole one?
 
 [hint:Flush into support/objects/infill]
-text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament change?
+text = Flush into support/objects/infill\nDid you know that you can reduce wasted filament by flushing it into support/objects/infill during filament changes?
 
 [hint:Improve strength]
 text = Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?
 
 [hint:When do you need to print with the printer door opened]
-text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? More info about this in the Wiki.
+text = When do you need to print with the printer door opened?\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature? There is more info about this in the Wiki.
 
 [hint:Avoid warping]
 text = Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?

resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json

@@ -123,7 +123,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+	"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nDRAW_LINE_ONLY",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"max_layer_height": [

resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json

@@ -126,7 +126,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+	"machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nDRAW_LINE_ONLY",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"max_layer_height": [

resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json

@@ -126,7 +126,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20  F4000\nG1 X230 F4000\nG1 Z-1  F600 \nG1 X270 F4000\nG1 Y25  F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
+	"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20  F4000\nG1 X230 F4000\nG1 Z-1  F600 \nG1 X270 F4000\nG1 Y25  F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"max_layer_height": [

resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json

@@ -126,7 +126,7 @@
 		"0"
 	],
 	"machine_pause_gcode": "M600",
-	"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
+	"machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM109 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"max_layer_height": [

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "10"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Nylon @Ender-5 Max-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PETG @Hi-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_retraction_length": [
         "0.8"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_retraction_length": [
         "0.8"

resources/profiles/Creality/filament/CR-PETG @SPARKX i7-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_type": [
         "PETG"

resources/profiles/Creality/filament/CR-PLA @Hi-all.json

@@ -39,7 +39,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-PLA Matte @SPARKX i7-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/CR-Silk @SPARKX i7-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1.8"
+        "12"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Generic BVOH @Hi-all.json

@@ -45,7 +45,7 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "3"
+        "6"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1 Max_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1C_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic HIPS @K1_CFS-C-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "4"
+        "10"
     ],
     "filament_retract_before_wipe": [
         "100%"

resources/profiles/Creality/filament/Generic PLA @SPARKX i7-all.json

@@ -48,7 +48,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "16"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Generic PVA @Hi-all.json

@@ -48,7 +48,7 @@
         "1"
     ],
     "filament_max_volumetric_speed": [
-        "3"
+        "6"
     ],
     "filament_retract_before_wipe": [
         "100"

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -57,7 +57,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "1"
+        "10"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper ABS @K2 Plus-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "23"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PC @K2 Plus-all.json

@@ -54,7 +54,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "18"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "18"
     ],
     "filament_retract_before_wipe": [
         "100"

resources/profiles/Creality/filament/Hyper PLA @Hi-all.json

@@ -39,7 +39,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -45,7 +45,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/filament/Hyper PLA @SPARKX i7-all.json

@@ -51,7 +51,7 @@
         "0"
     ],
     "filament_max_volumetric_speed": [
-        "2"
+        "21"
     ],
     "filament_minimal_purge_on_wipe_tower": [
         "15"

resources/profiles/Creality/machine/Creality K1 Max (0.4 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max (0.6 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max (0.8 nozzle).json

@@ -124,7 +124,7 @@
 	"default_filament_profile": [
 		"Creality HF Generic PLA"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails": [

resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1 SE 0.4 nozzle.json

@@ -123,7 +123,7 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K1-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"scan_first_layer": "0",
 	"thumbnails_format": "PNG",

resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json

@@ -53,7 +53,7 @@
 	"machine_min_travel_rate": "0,0",
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json

@@ -54,7 +54,7 @@
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
 	"machine_ptc_exist": "1",
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"machine_start_gcode": "START_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM204 S2000\nM104 S[nozzle_temperature_initial_layer]\nG1 Z3 F600\nM83\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Creality/machine/Creality K2 0.2 nozzle.json

@@ -88,7 +88,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y130 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y130 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X130 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 0.4 nozzle.json

@@ -86,8 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
-	"machine_unload_filament_time": "0",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",
 	"nozzle_volume": "183",

resources/profiles/Creality/machine/Creality K2 0.6 nozzle.json

@@ -86,7 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 0.8 nozzle.json

@@ -86,7 +86,8 @@
 		"5"
 	],
 	"machine_pause_gcode": "PAUSE",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_type": "hardened_steel",

resources/profiles/Creality/machine/Creality K2 Plus 0.2 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.4 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.6 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Plus 0.8 nozzle.json

@@ -138,7 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; creality_uuid: <random_uuid>\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "END_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.2 nozzle.json

@@ -138,8 +138,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": ";SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\n\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
-	"machine_end_gcode": "END_PRINT",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X0 Y245 F30000\nG1 Z{z_after_toolchange} F600",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",

resources/profiles/Creality/machine/Creality K2 Pro 0.4 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.6 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 Pro 0.8 nozzle.json

@@ -136,7 +136,8 @@
 	"default_filament_profile": [
 		"Creality Generic PLA @K2-all"
 	],
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_end_gcode": "{if print_sequence == \"by object\"}\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{max_layer_z+2} F600\n{endif}\nEND_PRINT",
 	"machine_pause_gcode": "PAUSE",
 	"change_filament_gcode": "G2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 0.8} F900\n{endif}\nG1 X0 Y160 F30000\nG1 Z{z_after_toolchange} F600",

resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json

@@ -53,7 +53,8 @@
 	"machine_min_travel_rate": "0,0",
 	"machine_pause_gcode": "PAUSE",
 	"machine_platform_motion_enable": "1",
-	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM104 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 E0.8 F300\nG1 X0 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG1 X150 Y0 E9 F{filament_max_volumetric_speed[initial_extruder]/0.3*60}\nG92 E0\nG1 Z1 F600",
+	"_comment": "the generated by Creality_Print start gcode removes a warning/error message when printing with Orca because it thinks its sliced with CrealityPrint ",
+	"machine_start_gcode": "; HEADER_BLOCK_START\n; generated by Creality_Print V7.0.1.4212 on [year]-[month]-[day] at [hour]:[minute]:[second]\n; total layer number: [total_layer_count]\n; HEADER_BLOCK_END\n; SET PRINT AREA MIN AND MAX COORDINATES TO ENABLE ADAPTIVE PROBING\n; MINX = {first_layer_print_min[0]}\n; MINY = {first_layer_print_min[1]}\n; MAXX = {first_layer_print_max[0]}\n; MAXY = {first_layer_print_max[1]}\nM140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]\nT[initial_no_support_extruder]\nM109 S[nozzle_temperature_initial_layer]\nM204 S2000\nG1 Z3 F600\nM83\nG1 Y150 F12000\nG1 X0 F12000\nG1 Z0.2 F600\nG1 X0 Y150 F6000\nG1 X0 Y0 E15 F6000\nG1 X150 Y0 E15 F6000\nG92 E0\nG1 Z1 F600",
 	"machine_unload_filament_time": "0",
 	"manual_filament_change": "0",
 	"nozzle_hrc": "0",

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.04.00.02",
+	"version": "02.04.00.04",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/Elegoo/machine/EC/Elegoo Centauri 0.4 nozzle.json

@@ -62,7 +62,7 @@
 	"change_filament_gcode": "",
 	"machine_pause_gcode": "M600",
 	"support_multi_filament": "0",
-	"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
-	"machine_start_gcode": ";;===== date: 20251011 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"layer_change_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
+	"machine_start_gcode": ";;===== date: 20251011 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X-1.2 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X-0.5 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"machine_end_gcode": ";===== date: 20250603 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
 }

resources/profiles/Elegoo/machine/ECC/Elegoo Centauri Carbon 0.4 nozzle.json

@@ -66,7 +66,7 @@
 	"change_filament_gcode": "\n;==========CC_CHANGE_FILAMENT_GCODE_CCB==========\n;===== date: 2025-12-04-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n;==========CC_CHANGE_FILAMENT_GCODE_CCE==========",
 	"machine_pause_gcode": "M600",
 	"support_multi_filament": "1",
-	"layer_change_gcode": "SET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
-	"machine_start_gcode": ";===== CC_START_GCODE ================\n;===== date: 2026-04-28-001 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nM83\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\n\n\nG90\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X0 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X0.9 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"layer_change_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
+	"machine_start_gcode": ";===== CC_START_GCODE ================\n;===== date: 2026-04-28-001 =====================\n;printer_model:[printer_model]\n;initial_filament:{filament_type[initial_extruder]}\n;curr_bed_type:{curr_bed_type}\n;bed_level_temp:[bed_temperature_initial_layer_single]\nM400 ; wait for buffer to clear\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nG90\nM83\nG28 ;home\nM729 ;Clean Nozzle\nM190 S[bed_temperature_initial_layer_single]\n\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n    {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n    M106 P3 S255\n    {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n    M106 P3 S180\n    {endif};Prevent PLA from jamming\n{endif}\n\n;enable_pressure_advance:{enable_pressure_advance[initial_extruder]}\n;This value is called if pressure advance is enabled\n{if enable_pressure_advance[initial_extruder] == \"true\"}\nSET_PRESSURE_ADVANCE ADVANCE=[pressure_advance] ;\nM400\n{endif}\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\n\n\nG1 X{print_bed_max[0]*0.5} Y-1.2 F20000\nG1 Z0.3 F900\n\n\nG90\nM83\nG92 E0 ;Reset Extruder\nG1 F{min(6000, max(900, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X0 E10.156 ;Draw the first line\nG1 Y98.8 E7.934\nG1 X0.9 Y100 E0.1\nG1 Y-0.3 E7.934\nG1 X{print_bed_max[0]*0.5-50} E6.284\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5-10} E2\nG1 F{0.2*min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+10} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+30} E2\nG1 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]/0.5/0.3*60))} \nG1 X{print_bed_max[0]*0.5+50} E2\n;End PA test.\n\n\nG3 I-1 J0 Z0.6 F1200.0 ;Move to side a little\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"machine_end_gcode": ";===== CC_END_GCODE ================\n;===== date: 2025-12-04-001 =====================\nM400 ; wait for buffer to clear\nM140 S0 ;Turn-off bed\nM106 S255 ;Cooling nozzle\nM83\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800\nG2 I1 J0 Z{max_layer_z+0.5} F3000 ; lower z a little\nG90\n{if max_layer_z > 100}G1 Z{min(max_layer_z+50, printable_height+0.5)} F20000{else}G1 Z100 F20000 {endif}; Move print head up \nM204 S5000\nM749\nM204 S5000\nM400\nM83\nG1 X202 F20000\nM400\nG1 Y250 F20000\nG1 Y264.5 F1200\nM400\nG92 E0\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM84 ;Disable all steppers"
 }

resources/profiles/Elegoo/machine/ECC2/Elegoo Centauri Carbon 2 0.4 nozzle.json

@@ -86,9 +86,9 @@
 		"9"
 	],
 	"change_filament_gcode": "\n;==========CC2_CHANGE_FILAMENT_GCODE==========\n;===== date: 2026-01-16-001 =====================\nM106 S0\nM106 P2 S0\nG1 Z{min(max_layer_z+3, printable_height+0.5)} F1200\nM6211 T[next_extruder] L[flush_length] M{old_filament_e_feedrate} N{new_filament_e_feedrate} Q[old_filament_temp] R[nozzle_temperature_range_high] S[new_filament_temp]\nT[next_extruder]\n",
-	"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}",
+	"layer_change_gcode": "M73 L{layer_num+1}\n;LAYER:{layer_num+1}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER={layer_num+1}",
 	"machine_end_gcode": ";===== CC2_END_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\n\nM140 S0 ;Turn-off bed\nM83\nG92 E0 ; zero the extruder\nG1 E-1.5 F1800\nG2 I0 J1 Z{max_layer_z+0.5} F3000 ; lower z a little\nM106 S0\nM106 P2 S0\nG90\n{if max_layer_z > 75}G1 Z{min(max_layer_z+5, printable_height+0.5)} F20000{else}G1 Z80 F20000 {endif}; Move print head up \nG180 S9\nM104 S0\nM84\n",
-	"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
+	"machine_start_gcode": ";===== CC2_START_GCODE ================\n;===== date: 2026-01-16-001 =====================\n\nG90\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single] A\nM106 S0\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0 FROM_SLICER=1\nM204 S{min(20000,max(1000,outer_wall_acceleration))} ;Call exterior wall print acceleration\nG28\nM109 S[nozzle_temperature_initial_layer]\nM6211 A1 L200 T[initial_no_support_extruder] Q[nozzle_temperature_initial_layer] R[nozzle_temperature_initial_layer] S[nozzle_temperature_initial_layer]\nT[initial_no_support_extruder]\n\n{if first_layer_print_min[1] > 0.5}\nG180 S7\nG1 X{print_bed_max[0]*0.5-1} Y-1.2 F20000\nG1 Z0.5 F900\nM109 S[nozzle_temperature_initial_layer]\nM83\nG92 E0 ;Reset Extruder\nG1 E6 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nM106 S200\nG1 X{print_bed_max[0]*0.5-41} E20 F{min(12000, max(1200, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))} \nG1 F6000\nG1 X{print_bed_max[0]*0.5-46} E0.8\n{else}\nG1 E30 F{min(1200, max(120, filament_max_volumetric_speed[initial_no_support_extruder]*60/2/2.5043))}\n{endif}\nM106 S0\nG180 S8\nG1 F20000\nG92 E0 ;Reset Extruder\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count] CURRENT_LAYER=0\n;LAYER_COUNT:[total_layer_count]\n;LAYER:0",
 	"retract_restart_extra_toolchange": [
 		"0.5"
 	]

resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
 	"layer_height": "0.16",
 	"instantiation": "true",
+	"renamed_from": "0.16mm Optimal @EOS Giga 0.4 nozzle",
 	"name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json

@@ -2,6 +2,7 @@
 	"inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle",
 	"layer_height": "0.18",
 	"instantiation": "true",
+	"renamed_from": "0.18mm Fine @EOS Giga 0.6 nozzle",
 	"name": "0.18mm Fine @Elegoo Giga 0.6 nozzle",
 	"compatible_printers": [
 		"Elegoo OrangeStorm Giga 0.6 nozzle"

resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json

@@ -5,6 +5,7 @@
 	"from": "system",
 	"setting_id": "PEOSG04020",
 	"instantiation": "true",
+	"renamed_from": "0.20mm Standard @EOS Giga 0.4 nozzle",
 	"default_acceleration": "3000",
 	"filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
 	"initial_layer_print_height": "0.25",

resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json

@@ -4,5 +4,6 @@
 	"wall_sequence": "inner-outer-inner wall",
 	"reduce_crossing_wall": "1",
 	"instantiation": "true",
+	"renamed_from": "0.20mm Strength @EOS Giga 0.4 nozzle",
 	"wall_loops": "6"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle",
 	"layer_height": "0.24",
 	"instantiation": "true",
+	"renamed_from": "0.24mm Draft @EOS Giga 0.4 nozzle",
 	"name": "0.24mm Draft @Elegoo Giga 0.4 nozzle"
 }

resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json

@@ -2,5 +2,6 @@
 	"inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle",
 	"layer_height": "0.24",
 	"instantiation": "true",
+	"renamed_from": "0.24mm Fine @EOS Giga 0.8 nozzle",
 	"name": "0.24mm Fine @Elegoo Giga 0.8 nozzle"
 }