/kx/spoolman/status only exposed 'configured' (server URL is set),
not actual reachability — health_check() ran once at boot and was
only logged, never surfaced to the API or rechecked afterwards.
Now the poll loop rechecks reachability every 30s, the status endpoint
returns 'reachable', and the frontend dot shows red + '(unreachable)'
when Spoolman is configured but not responding.
The setting was persisted to config.ini and returned by /api/settings,
but --poll-interval was never registered as an argparse argument and
POLL_INTERVAL was missing from config_loader's env mapping, so
self._args.poll_interval never existed. The poll loop used a hardcoded
3.0s wait regardless of the configured value.
- OctoPrint upload response was built twice in handle_file_upload
- gcode_filaments cache load failure on dashboard reprint now logs a
warning (silent failure would degrade the Issue #84 fix unnoticed)
- filament metadata backfill failures now log at debug level
The print/start payload was duplicated in three places (upload path,
KX store, Moonraker API) and had drifted: the settings-based
vibration_compensation value was missing in the upload path. All three
paths now use _build_print_payload() and _reset_skip_state().
- Dashboard reprint now delegates to _start_print with gcode_filaments from DB
so the used_paint_indices filter applies correctly (Issue #84)
- Startup log no longer shows 0.0.0.0 — actual LAN IP is displayed (Issue #86)
- New vibration_compensation setting: toggle in Settings UI activates resonance
compensation before each print, follows exact auto_leveling pattern (Issue #85)
The print-dialog spool dropdown built its option label from
sp.filament.vendor (the whole vendor object) instead of
sp.filament.vendor.name, so options rendered as "#5 [object Object] PLA+
(1000g)". The sibling builder in the slot card already uses .vendor.name;
this aligns the two.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
The AMS-slot -> Spoolman-spool persistence never worked: KobraXBridge
referenced `config_loader` in both the load (__init__) and save
(handle_kx_spoolman_set_active) paths, but the module alias is `env_loader`
(kobrax_moonraker_bridge.py:32). The resulting NameError was swallowed by a
bare `except`, so the map was neither loaded on startup nor written on change
- it only appeared to persist.
The map also lived in a single global `[spoolman] slot_spools` key, so on a
multi-printer bridge two AMS units clobbered each other's mapping (same class
of bug as #74/#75 for filament profiles).
- config_loader: add list_spool_map()/save_spool_map(printer_id) using a
per-printer `[spoolman_<id>]` section with read-fallback to the legacy
global key, mirroring _filament_section/list_filament_profiles. The global
`[spoolman]` section keeps server/sync_rate.
- bridge: load via config_loader.list_spool_map(self._printer_id); persist via
save_spool_map(..., self._printer_id); surface failures via log.warning
instead of a silent except.
- _build_mmu_object: emit real gate_spool_id from the per-printer map (was
hardcoded [-1]*num_gates) so Happy-Hare/OrcaSlicer can show the bound spool.
- config.ini.example: document the [spoolman] section.
- tests: tests/test_spoolman_slot_map.py (per-printer isolation, persistence
round-trip, server/sync_rate preservation, parser robustness).
Verified on a 2-printer bridge: after restart KX1 loads its spools and KX2
loads its own, isolated; a real multicolor print deducted per slot (white spool
1.02g vs 0.98g slicer estimate) against the correct printer's spools.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Drucker interpretiert ams_box_mapping als geordnete Liste (Eintrag N = TN).
Bei Drucken die T0 nicht nutzen wurden die Einträge um 1 verschoben,
sodass T2 (rot) auf den Slot von T3 (weiß) zeigte.
Fixes#78
Bei Multicolor-Drucken mit nicht bei 0 startenden Paint-Indizes (T2, T3...)
wurde paint_index als 0,1,2... statt als tatsächlicher GCode-T-Index gesendet.
Drucker hat dadurch die falschen Slots für die falschen Farben verwendet.
Fixes#78
- Slot color editor: Pickr HSV color picker (offline, served from lib/),
recent swatches (up to 16, localStorage), copy color from other slot
- Unified axes control panel: XY+Z merged, shared step size + custom mm input
- Language selector moved from header to Settings → Appearance
- Filament mismatch detection blocks Upload-and-Print on material mismatch,
slot mapper opens automatically
- Spoolman spool-per-slot assignment in AMS status tab and Filaments settings
- Fix: Spoolman sync rate label — 0=end of print, not disabled (Issue #76)
- Fix: lib/ assets served by bridge static handler for offline use
- UI: global unified select + input styling, set-row labels match modal-field
Per-printer [filament_profiles_<id>] sections so configuring one printer no
longer overwrites another (read-fallback to the legacy global section keeps
single-printer setups unchanged). Dropdown/switch links now navigate to each
printer's own bridge_url. Adds pytest coverage and a CHANGELOG entry.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
- Merged XY + Z axis cards into single Axes Control panel with shared step
size row and free-text mm input; Home XY/Z placed below respective pads;
Home All + Motors Off centred at bottom
- Language selector removed from header bar, now only in Settings → Appearance
- Upload-and-Print blocked on GCode/AMS material mismatch; slot mapper dialog
opens automatically with mismatch warning highlighting affected slots
- Spoolman spool-per-slot assignment: dropdown in AMS status tab per kachel,
dedicated card in Filaments settings tab with save button
- nightly.yml: NIGHTLY_CHANGELOG.md takes precedence over auto-generated
commit log when present; CI uses it as release body verbatim
Keine manuelle VERSION-Pflege mehr für Nightlies. CI ermittelt:
- letzten Stable-Tag (z.B. v0.9.27)
- nächste Patch-Version (0.9.28)
- laufenden Nightly-Counter aus vorhandenen Tags (nightly-0.9.28-nightlyN)
VERSION-Datei im Repo bleibt auf dem letzten Stable, wird vom CI
für jeden Nightly-Build überschrieben und committet.
CHANGES.md war statisch und zeigte immer denselben alten Stand.
Jetzt: git log <prev-tag>..HEAD, chore-Nightly-Commits rausgefiltert,
englisch, nur echte feat/fix/docs-Commits.
